Sunday, December 27, 2009

Winter Check 2


Dec 24, 2009
Checked on the hive at the Peczuh Farm. Looks like the cows have been bumping into it. The corners of the corroplast roof were turned up and there were cow prints all around the hive. The cows aren't usually loose in this field - I might have to keep an eye on that. Couple of bees frozen in the snow outside. Gentle hum inside when I placed my ear up to the entrance hole.

Tuesday, December 22, 2009

Winter check


Had the chance to drop in on our house in Price today to do some repairs on the garage for the renters. I took along some corks to plug 2 of the entry holes. She was covered with snow. The roof seems to be holding up well.

Saw this little girl about 8 feet from the hive. Must have gone too far on her cleansing flight.




Apparently there was no need to bring the corks as the girls had plugged up the holes nicely themselves. I realize I should have done this a couple months ago before it got cold.  There are quite a few bits of wax cappings around the entrance holes and on the small landing board. I take this as a sign that they are uncapping their stores (or possibly hatching brood?). A few dead bees around the middle entrance (see middle hole in picture above.  I'm not sure what to make of that - perhaps it's just too cold for the house bees to properly clean them out.

Check out that reduced entrance. Makes me feel like they don't really need me at all (I think that's a good thing).

Wednesday, August 19, 2009

We have more queens!

Time: 10:00 ish
Weather: mid 80s - no breeze

Inspected hive1 again. Found the queen again. Saw no eggs, however we did find one frame with a dozen or two larva growing in various stages - ALL in queen cells with royal jelly (milky white). None of the cells were capped yet. Will check back in a week to see what's happening. I suspect that the queen they were able to raise was not laying well so they will replace her.

Monday, August 10, 2009

We have a queen!


Time: 11:30
Weather: 80ish - sunny - no breeze

Hive1 - inspected the queenless hive again today. There were bees coming and going at the entrance (which is still reduced). Found no sign of a queen. No eggs. No larva. Had looked at all 9 frames. Decided to look again paying closer attention for eggs. Found the queen on frame 3. She was surrounded by attendants and appeared to be laying eggs. I could still see no evidence of eggs. The comb was rather dark so I should have been able to see them. We've got a queen though. Not sure if she's mated yet. We'll check back in a week to see how she's doing.

Wednesday, July 29, 2009

Midnight bees TBH inspection (brief)

Time: 7:30 ish
Weather: 80s slightly breezy

Drove out to the farm (Peczuh's) on my way home to check the bees. Lots of bees coming and going. They were noticeably irritated even before taking off the lid. Tylor got a sting to the side through her shirt.

Because of their current foul mood I only looked a bit in the north end. The 2 partial combs that have been drawn out on the north of the aluminum comb guide are perfectly straight. Happy to see that it's working.

The comb that had collapsed last time was now fused to the side/bottom. Didn't want to stick my hand in there today to get it out so it'll stay right where it is for now.

Peaked underneath to see if i could see anything. There appears to be some scratching in the screen bottom. Almost like something with claws was trying to get in. This might explain their moodiness. I Saw no scratching marks near the entrance at all. I'll have to watch this to see if it gets worse. If so, I might just close the bottom board.

Tuesday, July 28, 2009

Update Schampel TBH

Time: 7:00 pm
Weather: perfect

Checked in on the hive this evening. The staples holding the plastic roof to the frame were coming out. Reattached it with 2 screws in each corner and by retapping the staples in place. The wind has been rather nasty lately (lost shingles off the garage too).

This hive is full!!! Also heavily propolised. She was glued together good. Even the follower boards were propolised in place.

On my last visit I had added 3 bars to the north end. This was the end that had the straightest comb so I thought I'd let them build out this way to encourage further straight comb. Wrong. On the 3 new bars they have drawn out comb at almost 90 degrees from the bars (and the rest of the comb). Decided not to break it all up at this point. I will have to address it later in the fall when it cools down or maybe in the spring so I can see how much they needed for winter and take the rest. I think it's all honey but I'm not sure as I wasn't able to get into it really.

The curved comb at the south end was very thick and full. I didn't measure it but I'm guessing it was at least 2 inches at the top. Mostly capped too. I added 5 bars on the south end to give them room to grow. Since its all going to be honey and will be removed in the spring, I'm not overly concerned with the curve of it. When I take the honey out in the spring, I'll replace the bars with some that have better guides for comb building.

Very docile bees. I love this hive. It's my favorite to work. Jaden was right there with me with bees flying in and out (before I opened it up. Tylor and John (renter) got right in the thick of it with me (no protection whatsover). We all got a good finger full of fresh honey that was exposed when I separated the bars on the south end.

Varroa Mite

I got a closer look at the mite I found on one of the girls yesterday. These photos and video were taken with a hand held iPhone looking through a 40x magnifier at work (The video is a bit shaky).
These little buggers have one monster of a grip. When I first scraped it off of the bee with the end of my razor knife, It would not let go of the blade. I could not shake it off or knock it off by hitting the blade on the desk. I ended up scraping it off with another blade to get it on the desk for observation. The dead be was on the desk about 1/2 inch away from the mite. The mite crawled over and climbed back on the bee (though at that point it was just a bee head (half a bee?))


Underside

Top side (hairy)

Mite on Bee Head
You can see it crawling around on the "hair" towards the end of the clip.

Underside. I didn't get it on video but I watched it flip itself upright with those short stubby legs.